Bambi VT Range, VT250, 2.5hp/1.84Kw, 300l/min, 8 bar, 59L Tank, Dental Air Compressor

Pump Oil Free Direct Drive
Motor 2.5hp - 1.84kw
Voltage 230/50/1 13 amp Supply
Tank Size - 59L

Adsorption Dryer on D versions Only

Output 300l/min, 10.59 cfm Displacement (not F.A.D) Free Air Delivered (F.A.D) Output 160l/min, 5.64 CFM
Max Working Pressure 8 Bar 

At the heart of the Bambi VT range is their all new Vee Twin pump unit with one of the lowest noise levels of any oil free compressor available, made possible by the very latest “tilting piston” technology. Perfect when you demand the highest possible air quality for critical applications; dentistry, scientific laboratories, food packaging, pneumatic controls, hospital ventilators, drink dispensing – and anywhere when low maintenance is essential.

Packed with novel technical features, even the standard models without air dryers are fitted with a “soft start” solenoid valve.

This discharges the air pressure in the pump whenever the power is disconnected, protecting the compressor from overload and extending the service life.

Anti corrosion, internally coated air receivers are fitted across the range ensuring the air is contamination free.

Every model is available with our innovative Air Dryer unit designed to guarantee “desert dry” air.

The multi row, fan assisted after-cooler reduces the air temperature prior to entering the dryer, dramatically reducing the air temperature enables the integral coalescing filter to collect and remove water droplets as small as 0.01 microns.

In this way we remove 99% moisture content before the desiccant adsorption system powers the dryness right down to -40°c Dewpoint.

Constructed from high quality “Inox” stainless steel, the dryer regenerates itself every time the compressor cycles and requires no regular maintenance.

An integral downstream HE dust filter removes any residual dust. And, uniquely on this size of compressor, the Duplex units are fitted with a sequential start system which enables these 3.0Hp and 4.0Hp systems to run off a 20 amp single phase power source reducing installation costs and start up load.