Nitrogen Generation System for Wine Tasting Plant

The combination of an Airwave VARI-Speed compressor, NANO NDL040 adsorption dryer, and NANO Eco-Gen nitrogen generator was choosen for generating nitrogen for a wine tasting plant. Here's a breakdown of each component and how they work together:

1. Airwave VARI-Speed Compressor:

This compressor provides the compressed air source for the nitrogen generation process.
Its 10hp/7.5kW motor delivers a free air delivery (FAD) of around 36 CFM, which should be sufficient for most small to medium-sized wine tasting plants.
The variable speed drive helps optimize energy consumption by adjusting the compressor speed to match the actual air demand.
The 350L tank mounted with a dryer ensures adequate air storage and removes moisture from the compressed air, crucial for preventing corrosion and ensuring the purity of the generated nitrogen.
2. NANO NDL040 Adsorption Dryer:

This adsorption dryer further removes moisture from the compressed air to reach pressure dew points of -40°C or lower.
This is essential for preventing condensation and ensuring the quality of the generated nitrogen, especially important for wine preservation and preventing oxidation.
The NANO series dryers are known for their energy efficiency and ease of maintenance.
3. NANO Eco-Gen Nitrogen Generator:

This pressure swing adsorption (PSA) technology generator separates nitrogen from the compressed air stream.
The NANO Eco-Gen series is known for its high purity nitrogen output (up to 99.995%) and energy efficiency.
Its compact design makes it suitable for smaller spaces often found in wine tasting plants.
Overall System Considerations:

The capacity of the nitrogen generator should be matched to the specific needs of the wine tasting plant, considering factors like the volume of wine to be preserved, the desired nitrogen flow rate, and any purging requirements.
Proper installation and maintenance of the equipment are crucial for optimal performance and longevity. This includes regular filter changes, oil changes for the compressor, and preventive maintenance for the adsorption dryer and nitrogen generator.